DTF Supplies in Richardson, TX: Ink, Film & Powder, Same-Day Local Pickup or Nationwide Shipping
Manufacturer-direct DTF inks, PET films, and adhesive powders, no minimums, OEKO-TEX and AATCC/ASTM certified, ready for same-day pickup in Richardson or 1–3 day shipping anywhere in the US.
- True manufacturer, not a reseller
- No minimum order
- OEKO-TEX & AATCC/ASTM certified
- 100+ wash durability
- Same-day Richardson pickup
What are DTF supplies?
DTF supplies are the ink, PET film, and adhesive powder used to print and heat-press a design onto fabric. A design prints onto film with water-based pigment ink, gets coated in adhesive powder while wet, cures under heat, then transfers to the garment with a heat press. DAB DTF manufactures all three in Richardson, Texas, and ships them individually or in bulk nationwide.
The three DTF supplies we manufacture in Richardson: ink, PET film and adhesive powder
What you need to start
| Supply | What it does | Available as | Compatible with |
|---|---|---|---|
| DTF Ink (CMYK + White) | Water-based pigment ink for vivid, wash-resistant color | 1000 ml bottles | DTF-based Epson print engines |
| DTF Film Rolls | PET release film that carries the printed design | 24" x 328 ft, hot peel or cold peel | All DTF printers |
| DTF Adhesive Powder | TPU powder that bonds the design to fabric | 2.2 lbs (1 kg) | Cotton, polyester, blends, nylon, rayon |
DTF Ink (CMYK + White)
Formulated for DTF-based Epson print engines, this 1000 ml water-based pigment ink holds color density and wash resistance batch after batch, with a fast-drying finish suited to both small runs and high-volume production.
DTF Film Rolls
Durable PET release film in 24-inch by 328-foot rolls, offered in hot peel and cold peel to match your fabric and press setup, with ink absorption tuned for sharp, high-resolution transfers.
DTF Adhesive Powder
TPU powder in 2.2 lb (1 kg) bags that bonds securely to cotton, polyester, nylon, rayon, and blends while keeping the finished garment soft and flexible to wear.
DAB DTF vs. buying from a reseller or broker
| Buying from DAB DTF (manufacturer) | Buying from a reseller or broker | |
|---|---|---|
| Pricing | Manufacturer-direct, no middleman markup | Marked up to cover the reseller's margin |
| Quality control | Tested in-house, OEKO-TEX and AATCC/ASTM certified | Depends on whichever factory the reseller actually sources from, often unverified |
| Minimum order | None | Often tied to the reseller's own minimums |
| Lead time | Ships from Richardson, TX with same-day pickup or 1–3 day nationwide | An extra link in the supply chain can add delivery time |
| Consistency | Same production line, batch-to-batch consistency | Can vary if the reseller switches suppliers |
How to use DTF supplies: step by step
Six steps, from file to finished garment. The same sequence runs on every order we print in Richardson.
Shop DTF supplies-
Step 01Prepare your design
in compatible design software, sized for the final print.
-
Step 02Print on DTF film
using DTF ink, direct onto the PET film.
-
Step 03Apply adhesive powder
evenly while the ink is still wet.
-
Step 04Cure the powder
in a curing oven or heat press.
-
Step 05Transfer to fabric
with a heat press, matching hot or cold peel to the film type.
-
Step 06Peel the film
to reveal the finished design; press again if needed for a smoother finish.
Why choose DAB DTF
-
01
True manufacturer, not a reseller or broker:
all ink, film, and powder are produced in our own 3,200 sq ft Richardson facility
-
02
No minimum order:
order one roll or a pallet
-
03
OEKO-TEX and AATCC/ASTM certified:
tested for durability, color accuracy, and performance
-
04
100+ wash durability
on finished transfers
-
05
Local advantage:
same-day pickup in Richardson, TX, serving Plano, McKinney, Allen, Frisco, and the wider DFW metroplex
-
06
Nationwide reach:
reliable shipping to all 50 states for consistent supply
-
07
Eco-friendly options:
low-toxicity inks and sustainable packaging where possible
-
08
Customer support:
guidance from product selection to application
-
09
Consistent materials, consistent results:
same production line, every order, so the film, ink, and powder you get this month match what you got last month
Wholesale pricing
Wholesale and bulk pricing available for print shops, apparel brands, and resellers. The more you order, the lower your per-unit cost.
Request wholesale pricingFrequently asked questions
Where can I buy DTF supplies in Texas?
DAB DTF manufactures and ships DTF ink, film, and powder directly from Richardson, Texas, with same-day local pickup and nationwide shipping. No minimum order required.
What supplies do I need to start DTF printing?
You need DTF ink (CMYK + White), PET transfer film (hot or cold peel), and TPU adhesive powder. All three are available individually or as a bundle from DAB DTF.
How much do DTF supplies cost to run per print?
Cost per print depends on ink coverage, film size, and powder used; ordering in bulk lowers the per-unit cost. Contact DAB DTF for a wholesale quote based on your typical order volume.
How long do DTF transfers last after washing?
DAB DTF's inks, film, and powder are AATCC/ASTM tested to hold up through 100+ home washes when applied and cared for correctly.
Which DTF inks and powders are compatible with my printer?
DAB DTF's 1000 ml pigment inks are formulated for DTF-based Epson print engines; the adhesive powder works with any DTF PET film, including our own hot and cold peel rolls.
How should I store DTF film and ink to keep them fresh?
Store DTF film flat or upright in its original packaging away from direct sunlight and humidity, and keep ink bottles sealed at room temperature; both perform best used within the timeframe noted on the packaging.
How do DTF supplies compare to DTG or heat transfer vinyl?
DTF works on more fabric types than DTG (which is cotton-focused) and, unlike HTV, doesn't require weeding or per-color layering, making it faster for detailed, multi-color designs at low minimums.
Should I buy a commercial DTF kit or individual supplies?
A kit is convenient for getting started, but buying ink, film, and powder individually from a manufacturer like DAB DTF lets you reorder only what you use and avoid paying for components you don't need.
Why isn't my DTF transfer sticking to the fabric?
Weak adhesion usually comes down to powder coverage, curing temperature, or heat press pressure and dwell time rather than the film itself. Apply adhesive powder evenly while the ink is still wet, cure it fully, and match your press settings to the film's peel type.
Why do my DTF prints look different between orders, even with the same design?
Inconsistent results are most often a supplier or batch change, not your equipment. DAB DTF's ink, film, and powder come from the same production line, so color density, film finish, and powder behavior stay consistent order to order.
How do I keep DTF white ink from settling or clogging?
White ink pigment settles faster than color inks, so shake or agitate bottles before loading them and run your printer regularly to keep ink circulating. Store bottles sealed at room temperature between uses.
Why does my DTF film look oily or stained after printing?
An oily or stained finish usually means too much ink was laid down for the film's absorption rate, or the powder wasn't applied before the ink had time to sit. Matching ink volume and powder timing to the film specification clears it up.
Ready to work with a real DTF manufacturer?
Contact Us
Phone
+1 (469) 803-0412Visit us
1400 S Sherman St Ste 114, Richardson, Texas 75081Store hours
- Monday – Friday
- 9:00 AM – 5:00 PM
- Saturday
- 10:00 AM – 5:00 PM
- Sunday
- Closed
Showroom